[Trever MacPherson]

I have to send out a huge thanks! Despite this being clearly a user knowledge problem, and with Sonar, the support has been phenomenal!

[Trever MacPherson]

You’re right, I don’t have multiple outputs, which I need to have. Still messing around with this, but it is definitely not a Toontracks issue, but a Sonar one. If I stumble on the answer, I will post it here so that others can benefit.

One question is about Mapping, I am not sure how this is done – but again, that’s a Sonar question, but if anyone has done the mapping for DFH and Metal Machine, that might be helpful.

[Trever MacPherson]

Aha

I think I have it! Messing around enough and something good may happen.

Here is what I did when I selected the soft synth.

[Trever MacPherson]

I suspect the problem is with my lack of knowledge around setting up a DAW.

This screencap might help out. Probably this is a Sonar question more than a Toontracks one. I have done multiple searches, but so far no luck!

[Trever MacPherson]

Now that I loaded the proper 64-bit VST, it loads properly, but when I drag a sequence in, it still doesn’t have any sound.

[Trever MacPherson]

Found out one part of the fix. I needed to rescan my VST folder. Make sure that C:Program FilesVstPluginsToontrack is in the VST folder and rescan. That will provide the 64-bit version. I still have no sound, but at least the soft synth is loading (see memory being utilized in EZDrummer) and that’s a start.

[Trever MacPherson]

I have a similar problem, except that I am using the latest version of EZDrummer and Sonar X2.

In my case, the Soft Synth loads up, I get the EZDrummer GUI, can even select the kits I have purchased. What I see though is 0MB loaded. I get no sound at all. EZDrummer works fine with Toon Tracks Solo 64, so I have to think it is some combination.

My setup is a Behringer Xenyx1204FX with USB UCA200 in. I can hear recorded wave files through the monitors on the Behringer (USB out to channel 7/8), but not the drums I am laying down.

In addition, I am using Windows 8 x64, Sonar X2 x64 but the Soft Synth comes up as ezdrummer (32-bit)

Thanks

[Author]

Replies