[Tom]

Thanks for all the Help!
 

Did you also select the edrum MIDI preset in the pull down menu, after placing it in the folder? Just checking, because it’s not automatically installed into each project until you select it.  

 
Thanks rentadrummer, That’s what the problem was ,I didn’t realize I had to select the present in the folder. It didn’t say that in the post .I though it was automatically applied to each project.
 
Regards,
Tom
 

[Tom]

Hey John,
 
Everything is set right in the TD20. I set-up the module with the specs given by Hart.
The kit plays all the internal module sounds correctly including the cymbal chokes.
I did also download the E-Drum midi presents And installed as follows:select Presets > MIDI > Manage in Finder / Explorer and place the uncompressed file in the folder. Is there any thing else that needs
to be done with the presents that I might not be doing.Does the presents folder only have to be placed in the Finder/Explorer folder or does something esle have to be done after that?
 
I’ll also try Input filtering off in Pro Tools, but I think with it reacting the same way in ToonTrack Solo , I think I’m going to get the same results. I must be missing a step somewhere. I also set up another trigger bank in the module and tried tweaking all the setting?
 
If you can think of anything I would greatly appreciate it.
Thanks again for the help!
Tom

[Tom]

Hi John,
Thanks for the reply! I didn’t have ToonTrack Solo set-up but I did install it to check it out. It does the same thing, when you hit the Hart cymbal  it triggers
cymbal 2 in 2.0 which is correct but the choke triggers cymbal 3. The other Hart cymbal when hit triggers cymbal 4 in 2.0 which is also correct but choke triggers cymbal 5. If you just touch the pressure strip under the cymbals you can see the other cymbals it’s triggering. I can’t figure it out, any thoughs?
 
Regards
Tom

[Tom]

Rogue,
 
Thanks for the reply !
 
I had tried to apply the settings/method to the “Crash” articulation  after the “Mute” didn’t work. I even play with  different release settings, but when I would try choking using the cymbal ,I just get another cymbal sound no choke.When I touch the Pressure Strip under the cymbal ,one cymbal gets another crash sound and the other gets a china.  I did also put the the E-Drum presents in proper folder. Any suggestions ?
 
Thanks again
 
 

[Author]

Replies