6

[Scott Eshleman]

Here’s a few references that i found.
I could probably find more if i wasn’t at work now…
In particular the [OPTIONS] section of the EZDrummer 3 manual
video – “Grooves” – Toontrack
as well as these other resources:
https://groovemonkee.com/blogs/blog/how-to-install-midi-files-into-ezdrummer3-with-a-linked-folder
video – Installing MIDI Files into EZdrummer3 using a Linked Folder – courtesy of Groove Monkee

[Scott Eshleman]

The SD3 DOWNLOAD location and SD3 INSTALLATION location are 2 different locations in the eyes of the installer,
even you put them on the same drive.

The Program Manager settings determine where the DOWNLOAD files are stored.
The Product installer will copy, expand or utilize the downloaded files to the INSTALLATION location.

Therefore, you will need to allocate twice the space required;
at least until the installation is completed after which the download files can be cleaned off the drive.

[Scott Eshleman]

SuperiorDrummer3 Operation Manual – Section 9.4 “The View Menu”

There are two applicable settings in the “View” menu:
Scale: These options change the total size of the Superior Drummer 3 interface. Its extremely useful if you have a very small laptop screen and need to make the entire interface smaller, or if you have a large screens and would like to see a larger scaled interface.
Size: Here you can choose one of the preset sizes for the Superior Drummer 3 window, or create a custom window size. Note: when creating videos with Superior Drummer 3 the 1080p option is very convenient!

as well as:
Set to Minimum Size and Scale: Choosing this option will change the size and scale of the SD3 window to the smallest possible option.
Reset to Default Size and Scale: Changes both the scale, size, and proportions of the window back to the default.

[Scott Eshleman]

EZDrummer2
https://www.toontrack.com/faq/how-do-i-move-the-sounds-for-ezdrummer-2/
EZBass & EZKeys
https://www.toontrack.com/faq/can-i-relocate-the-ezbass-sound-library-folder-to-my-external-drive/

I very recently moved all of my EZ libraries (EZKeys, EZBass & EZDrummer2) to an external drive.

EZDrummer2 & EZBass libraries were recognized by the standalone apps, the plugins ( and the Product Manager)
simply by browsing to the new library location within the product itself when prompted.
(I had to move them first & delete them from the old location.)

Following the same procedure within EZKeys did not seem to affect the same response.
My solution was to download and install one of my previously installed EZKeys libraries
(even though I had already installed & moved it to the new location).
This effectively seemed to affect the change for ALL of my other EZKeys library expansions & MIDI expansions.

[Scott Eshleman]

You can change the location to which downloads are saved
in the Product Manager’s [PREFERENCES].

[Author]

Replies