1

[redlogic]

Bear-Faced Cow wrote:

Sorry but you are wrong. Considering that you were running SD3 with in Logic, the reason for your slow down is because logic doesn’t have enough resources to let SD3 run at full speed. I am also running a 16GB system at the moment with zero issues and lots of tracks with plug-ins. If you are running everything all off of one drive, that is a huge clue to your problems. Logic needs plenty of disk traffic to operate

and before you decide to question this, know that I have been running Logic for over 30 years on far slower systems than yours without issue to it or the plug-Ins it hosts

jord

+1
Smooth and zippy here

Macmini 2019 3.2 GHz 6-Core i7, 32GB RAM, MacOS 10.15.2, LogicProX 10.4.8, FF400, UAD2 Satellite Octo

[redlogic]

Superior Drummer 2 definitely works on Catalina.
I installed it last night and everything works as it should.
But, if you plan on sticking with Superior, you should probably get SD3 at some point.
As MacOS evolves, SD2 will certainly be orphaned eventually.

Macmini 2019 3.2 GHz 6-Core i7, 32GB RAM, MacOS 10.15.2, LogicProX 10.4.8, FF400, UAD2 Satellite Octo

[redlogic]

Custom & Vintage SDX?

Macmini 2019 3.2 GHz 6-Core i7, 32GB RAM, MacOS 10.15.2, LogicProX 10.4.8, FF400, UAD2 Satellite Octo

[redlogic]

Bump

Macmini 2019 3.2 GHz 6-Core i7, 32GB RAM, MacOS 10.15.2, LogicProX 10.4.8, FF400, UAD2 Satellite Octo

[redlogic]

Geir Byre wrote:

Fixed!

How!?

Macmini 2019 3.2 GHz 6-Core i7, 32GB RAM, MacOS 10.15.2, LogicProX 10.4.8, FF400, UAD2 Satellite Octo

[redlogic]

Robert.Goble wrote:

registered users of toontrack products should have full forum access regardless of what product they’ve bought — I put my money behind Toontrack, and you inspire and reward my loyalty by opening up the forum gates and keeping me in the family. If I keep bumping into doors I’m not feeling part of the family… you want me to be part of the family. 

THIS!!!

Macmini 2019 3.2 GHz 6-Core i7, 32GB RAM, MacOS 10.15.2, LogicProX 10.4.8, FF400, UAD2 Satellite Octo

• This post was modified 5 years, 10 months ago by redlogic.

[redlogic]

+1000!

I’m in the same boat regarding upgrading from Superior 2 to Superior 3.

I thoroughly research my purchases before I buy.

It would be nice to be able to see what kinds of issues current users are facing as I research the upgrade.

I use an RME audio interface and I can read ALL the forums regarding ANY of their products.

I use Logic Pro from Apple and I can read ALL the forums regarding ANY of their products.

I own a fair amount of plugins by various manufacturers and I can read ALL the forums regarding ANY of their products.

What’s up Toontrack?

Macmini 2019 3.2 GHz 6-Core i7, 32GB RAM, MacOS 10.15.2, LogicProX 10.4.8, FF400, UAD2 Satellite Octo

[redlogic]

That fixed it!

Thanks

Macmini 2019 3.2 GHz 6-Core i7, 32GB RAM, MacOS 10.15.2, LogicProX 10.4.8, FF400, UAD2 Satellite Octo

[redlogic]

It’s been a week since your reply and still no change.

Any word on this issue?

Macmini 2019 3.2 GHz 6-Core i7, 32GB RAM, MacOS 10.15.2, LogicProX 10.4.8, FF400, UAD2 Satellite Octo

[redlogic]

Yes, only one account, only one email address.

Macmini 2019 3.2 GHz 6-Core i7, 32GB RAM, MacOS 10.15.2, LogicProX 10.4.8, FF400, UAD2 Satellite Octo

[redlogic]

Macmini 2019 3.2 GHz 6-Core i7, 32GB RAM, MacOS 10.15.2, LogicProX 10.4.8, FF400, UAD2 Satellite Octo

[redlogic]

Yes, it’s in there.
It’s the “FX” articulation.

Macmini 2019 3.2 GHz 6-Core i7, 32GB RAM, MacOS 10.15.2, LogicProX 10.4.8, FF400, UAD2 Satellite Octo

[redlogic]

@Erik said:
From the FAQ:

IS IT NECESSARY TO INSTALL THE FULL 230 GB SOUND LIBRARY?
No, the sound library download is divided into 5 parts. The minimum install size is approximately 41 GB.
Below are the specific downloads for the sound library. Sound library downloads must be installed in order.
Download 1: “Basic Sound Library” (All instruments, all tools and all articulations in close mics, OH Dyn and Amb Ribbon. Bleed in Snare Bottom (Kick and toms) , Approx. estimate 40gb)
Download 2: “Room Mics 1” (The rest of the Room mics: OH Cond, Amb Near, Amb Mid).
Download 3: “Room Mics 2 – Surround (5 ch)” (extra mics to achieve 5.0 surround, Front L/R, Center and Surround L/R)
Download 4: “Room Mics 3 – Height Surround (6 ch)” (extra mics to achieve 11.0 surround, Front Height, Rear Height and Rear Height Wide )
Download 5: “Extra Bleed” (The rest of the bleed in the close mics)  

If I don’t want the Surround parts (Downloads 3 & 4), can I just install Downloads 1, 2 & 5?
Just confused, because the FAQ says “Sound library downloads must be installed in order.”

Macmini 2019 3.2 GHz 6-Core i7, 32GB RAM, MacOS 10.15.2, LogicProX 10.4.8, FF400, UAD2 Satellite Octo

[redlogic]

The Swedes are known for their incredible eyesight.

Eat more Lutfisk!

Just kidding.
It really is a problem with today’s modern screens.

Macmini 2019 3.2 GHz 6-Core i7, 32GB RAM, MacOS 10.15.2, LogicProX 10.4.8, FF400, UAD2 Satellite Octo

[Author]

Replies