[Lespaulboy]

If you haven’t already (I’m running a TD-6 kit as well) you will need to adjust the sensitivity and potentially the velocity curves from the basic trigger menu in your TD-6 module for each pad (especially cymbals in your case). As well be sure that you have the correct pad defined in your module (CY-8 if you have a CY-8). In my case I had the wrong snare pad defined and was running into the same type of problem.

At this point you can make some fine tuning in SD2. Make sure you have the latest 2.2.1 version, as well make sure you have selected e-drums.

[Author]

Replies