Hi I have Roland TD9KX running through a M-AUDIO Fast Track Pro into Superior Drummer 2.3.2 sitting inside Solo 1.3.2 with NY Avatar kit. My problem is the cymbal sensitivity. I have two CY8 cymbals set up as crashes in SD2 and they both exhibit the same odd behaviour. Even light touches generate a full crash sound from SD2. It’s not intermittent – it happens all the time. Here’s what I’ve checked: * All the Humanize functions are turned on for those cymbals (and everything else) * The MIDI notes are properly mapped – I can see the correct cymbals responding on screen * I’ve turned it all off and on again – several times * The ride and Hi-hat cymbals and all toms work correctly * The kit sounds just fine when you listen to the raw audio out of the TD9 brain * I’ve reset the TD9 to factory defaults * I used MIDI-OX to look at the midi signals that are being sent from the TD9 and they show very light hits at the time when I’m getting big crashes * The velocity control for both cymbals is active and a straight line from bottom left to top right. * I’ve tried several of the combined presets – doesn’t make any difference. But there is one possible clue: It only does it with drumsticks selected in Tool Settings – not with Rods or Brushes. With Rods or Brushes selected, though, none of the toms work – they all show a red exclamation mark – perhaps I didn’t load them.
