Support for MIDI SysEx program change message?

EZdrummer Pre-sales
Viewing 3 replies - 1 through 3 (of 3 total)
  • John
    Moderator

    Hi,

    first you have to “Allow MIDI Program Change” on the MIDI In/E-drums page.

    Next, you select EZX with Bank MSB and Presets with Program Change.

    BR,
    John

    John Rammelt - Toontrack
    Technical Advisor

    1

    Thanked by: George Robinson
    George Robinson
    Participant

    Hi John, thanks for your guidance.

    I don’t find the terms ‘Program Change’, ‘Bank’ or ‘MSB’ in this online manual:

    EZDRUMMER 3 (THIS MANUAL APPLIES TO VERSION 3.0.3 OF EZDRUMMER 3)

    https://www.toontrack.com/manual/ezdrummer-3/

    Is there supplemental documentation, or are these topics not documented?

    John
    Moderator

    Hi,

    first go to the ‘MIDI In/E-drums’ page in EZdrummer 3
    MIDI_In
    There you enable ‘Allow MIDI Program Change’
    MIDI_Program
    Next, in your DAW (in my screen shots it’s Logic) you create a MIDI region on the EZdrummer 3 Instrument Track at the beginning of your song and create a Bank MSB (CC#00) event set to the EZX in your list you wish to use. If you have 10 EZX:s and wish to use the last, your Bank MSB value would be ‘9’, since it starts from ‘0’.
    Bank_MSB
    Then to select the preset, you add a Program Change event. In my case, I wanted the 16th preset, so I entered ’15’.
    ProgChange
    I hope this helps,
    John

    John Rammelt - Toontrack
    Technical Advisor

Viewing 3 replies - 1 through 3 (of 3 total)

Please log in to read and reply to this topic.

No products in the cart.

×