SD2 drops audio and midi device

[37357]

good afternoon
i am running SD 2.3.1
using roland duo capture
and roland edirol um 1 midi cable
triggering drums via a roland td3 unit
pc is 8 gig memory windows 8
after approx 3 8 minutes of playing i hear a click like a phone going down
sound dead and midi dead i then have to go into
options audio device click the device ok
same with the midi and continue for a few more minutes same happens again and again
please help with this
thank you very much

Topic

[John]

Hi,

things to check:

1) that you have the latest driver version for your audio/MIDI interface

2) that you have the latest version of Toontrack solo installed. I assume this is what you are running? 64-bit?

BR,
John

John Rammelt - Toontrack
Technical Advisor

[37357]

Original was meant to say. 3 to 8 mins
Toon track solo 64 ehhh. I don’t think I am I will check
Thanks

[37357]

ok installed 64 bit SD runs 30 sec to 1 min click audio dies and midi 🙁

[John]

@ what Buffer Size?

John Rammelt - Toontrack
Technical Advisor

[37357]

could you expand the what buffer size part please
thank you

[RuneBB]

http://lmgtfy.com/?q=buffer+size

Buffer size is how much time there is allotted for processing. You can adjust this.

[37357]

on the roland duo capture or the midi um1

[37357]

I have my roland duo capture set at audio buffer 5 real time and stability are equal
asio buffer samples 288

[John]

Ok,

so you’re using driver version 1.0.1 released less than 2 weeks ago?

I unfortunately do not understand the ‘5’ setting. If this would be a H/W buffer size in samples, it would be extremely low (impossible?).
Is this the expected milliseconds latency?
Try the ASIO with multiples of 32 – 64, 128, 256 to see if there’s any difference.

BR,
John

John Rammelt - Toontrack
Technical Advisor

[37357]

i did finally find the buffer settings 512 1024 2048 etc
i have had on 5012 and also on 1024 but the same fault occurs….i uninstalled everything and reinstalled again
still it happens
it must be a win 8 issue with vista it was spot on

[Author]

Replies