Topic: Ezdrummer (MetalHeads) Volume Issue!

Viewing 4 replies - 1 through 4 (of 4 total)

Replied June 11, 2013 at 16:25 #1965520

Nathan
Participant

Import the song from where?

I’m not following this AW -do you mean export the song from your DAW?

Are you using a hardware console to record and then your DAW to mix?

>

SD2.3, NYII, C&V, MC, MF, ED, Latin Perc, Twisted, Pop, N1H, Electronic, Classic, Funkmasters, Rock Solid, Blues, Indie-Folk.

Replied June 11, 2013 at 19:57 #1965542

Astral Worm
Participant

I mean export sorry! When I export the song to burn to a cd to check the mix in different cd players like my car or in the house the mix is way too low with the drums! But when I play it in fl studio 11 the drums sound just right! I use the mixing board off of my recording program! I also stated that I have the drums assigned to one of the channels in the mixer! I also might add that my velocity on ezdrummer I put at about 45 to 50! Is that too high? Sorry for the miss comunication! Maybe I need to unassign the drums from the fl studio mixer and just use the velocity knob on ezdrummer and go from there!

www.facebook.com/OfficialAstralWorm

Replied June 11, 2013 at 22:08 #1965544

Nathan
Participant

If there is a difference in mix balance between what you hear in playback on your DAW, and what it renders, I’d be looking at routing doubling-up signals or sending to phyical outputs and bypassing the mixer master in your DAW.

Sorry if I’m at cross-purposes here…

>

SD2.3, NYII, C&V, MC, MF, ED, Latin Perc, Twisted, Pop, N1H, Electronic, Classic, Funkmasters, Rock Solid, Blues, Indie-Folk.

Replied June 12, 2013 at 14:59 #1965555

Astral Worm
Participant

Thanks!! That worked out great bypassing the Master channel!

www.facebook.com/OfficialAstralWorm
Author

Replies

Viewing 4 replies - 1 through 4 (of 4 total)

Ezdrummer (MetalHeads) Volume Issue!

EZdrummer Help

Viewing 4 replies - 1 through 4 (of 4 total)