Eighties EBX Velocity/Volume. Hoping this is just an oversite.

[Shootie]

Using the Eighties EBX Electric Library. When adjusting Velocity in the Midi Values Editor, nothing happens. Typical with TT electronic-based products, Velocity equals volume. Am I missing something obvious, or hopefully it’s an oversite that can be fixed?

Even using the appropriate Library Grooves. They have the original Velocity that was performed, but there is no dynamic (volume) changes. It’s 100%, even when bringing the Velocity down to zero. Same with Midi Controller.

Both EZB and EBX are up to date. Thanks for your time.

EZD3 Tutorials | EZBass Tutorials | Toontrack themed FB Group | Toontrack themed Discord Group

Topic

[John]

Hi Shootie,

do you actually mean the ‘Electronic’ library part? The ‘Electric’ library works as any other electric bass library but the ‘Electronic’ part was based on a completely restored, recapped and calibrated Minimoog Model D Rev. 2 from 1976. They were not velocity sensitive (the reissue from 2016 introduced a velocity sensitive keyboard) so I assume this is by design.

BR,
John

John Rammelt - Toontrack
Technical Advisor

[Shootie]

I did mean Electronic. That’s unfortunate. If it was done on purpose, so be it. Thanks for the response, John!

EZD3 Tutorials | EZBass Tutorials | Toontrack themed FB Group | Toontrack themed Discord Group

[Author]

Replies