E-Drum triggers multiple drums (Alesis DM10)

[WoodeeUK]

Hi,

I am using SD2 and my E-Drums (Alesis DM10) works fine when using it’s trigger module but suddenly when it routes to SD2 solo I have the problem of SD2 triggering cymbals and other drums even if I start from an empty kit and learn each drum as I go. The rims of the drums are particularly problematic.

Anyone had these kinds of problems?

Topic

[John]

Hi,

first of all, you should start with the Alesis E-drum MIDI Preset on the Mapping page (and make sure your module is @ Factory Settings).
Next, I would check cross-talk settings in the module.

BR,
John

John Rammelt - Toontrack
Technical Advisor

[WoodeeUK]

@John said:
Hi,

first of all, you should start with the Alesis E-drum MIDI Preset on the Mapping page (and make sure your module is @ Factory Settings).
Next, I would check cross-talk settings in the module.

BR,
John  

thanks, I will give that a go. Would cross talk for all drums and cymbals need to be at zero?

[John]

I am sorry but I am too unfamiliar with the DM 10 to know that. I would just experiment.

John Rammelt - Toontrack
Technical Advisor

[Author]

Replies