Topic: SD3 – If we upgrade > whats happens to our presets and saved sounds from SD2 ?

SD3 – If we upgrade > whats happens to our presets and saved sounds from SD2 ?

Superior Drummer 3 Pre-sales

Posted August 16, 2017 at 16:34 #1908200

David Levy
Participant

Hi Toontrack,

I am a long time SD2 + EZD2 user who owns many existing SDX and EZX Packs .., and also Many of your PRESET PACKS , and MIDI PACKS.

Guys what happens now to our presets and saved sounds from SD2 …, if we upgrade to SUPERIOR DRUMMER 3 ?

Q1 …, are we going to lose everything from our parameter tweaks in saved projects ,
Q2 …, and also lose the ability to play our purchased preset packs because the old SD2 FX no longer exist ?

This is because SD3 now uses a whole new set of plugins to those that were used in SD2 and EZD2 ?

Q3 …, Does that mean we can no-longer recall those presets in SD3 if we upgrade ?
Q4 …, and what happens if we open old projects where SD2 was used , how are they going to work if we upgrade to SD3 ?

What happens to Xdrums that we saved in SD2 …,

Q5 …, are those Xdrums going to be remembered in SD3 ?

Guys (Toontrack) …,
SD3 looks awesome …, I just want to know (need to know) what to expect …,

Guys – what now becomes of my many years and thousands of hours worth of previous projects .., If I upgrade to the new SD3,

.., as SD3 now uses an entirely new set of plugins than the previous SD2 and EXD2 used to use (which was sonalkis) and every previous SDX and EZX library , including all your artist Preset Packs .., were all finely TWEAKED using these sonalkis Plugins …….., Is all this now NULL and VOID in SD3 ?

Regards
David

PS ; Toontrack .., please be very detailed with the reply ,

and Toontrack ….,
– if news is BAD – please, please, please do NOT candy coat the answers – nor attempt to justify why ..,
(I realise companies and functionalities need to move forward OK – and we have also wanted SD3 for a long time)

So Toontrack …, just lay down the detailed facts as they are , and if the news is bad regarding my questions above …, then us users will just have to “suck it up” – OK

Please .., just lay down the facts only minus the sales pitch – regarding the questions …, so we can open our OLD projects > “and do what we have to do” to move forward carry on / continue on (whatever that may be) after we have upgraded to SD3

USERS …., (a request)

If the news is Bad …., ( ie; “IF” .., opening old projects is not smooth sailing…, )
please , please , please DO NOT use this thread as an avenue for you to Vent , bitch and moan (please save that for a thread of your own)

Hopefully the news is good …,
but if not .., I wish this to be nothing but a pro-active positive thread – to find out how best to move forward , and not have it distracted or derailed by whining

cheers 🙂
Creator

Topic

Viewing 15 replies - 1 through 15 (of 15 total)

Replied August 16, 2017 at 17:25 #1996545

Olof Westman
Forum Crew

Q4
SD3 is not a slot in replacement for SD2 like EZ2 was for EZ1. SD3
is a new plug-in with a new plug-in id and a new name. It will not
automatically appear in any DAW projects where SD2 was used.
SD2 will still be used in those projects.

Q1,2,3,5
SD2 combined presets can be loaded in SD3 and that goes for factory
presets, producer presets and user presets alike. The result of importing
SD2 presets like that varies but usually they sound the same or very
similar in SD3. There are exceptions, of course. Sometimes because
the new FX cannot fully replicate the SD2 one and sometimes because
the MidiNodes in SD2 can do something that SD3 stacking cannot.

Olof Westman - Toontrack
Coder

1
Thanked by: Henry

Replied August 17, 2017 at 08:53 #1996572

Henrik
Participant

Since Superior Drummer 3 doesn’t replace your Superior Drummer 2 installation, you can keep both – until you feel confident to only use Superior Drummer 3!

Henrik Ekblom - User Experience Designer
Toontrack

Replied March 20, 2018 at 20:11 #2003391

David
Participant

Hello! new to S3. We had always stored our combined presets from Super 2.0x in our OS X documents folder. How do we get S3 to recognize them please?

Thank you!

Replied March 21, 2018 at 13:31 #2003207

Dean T.Brewer
Participant

I can’t seem to find my Superior Drummer 2 kits that I have saved. It appears as though both SD2 and SD3 save to the same folder but when in SD2, I only see SD2 saved kits and when in SD3, I only see SD3 saved kits. Both programs save to One Drive/Documents. I may change that to a local folder but apparently, that was the default when I installed both programs.

Thank You.

Replied March 25, 2018 at 12:21 #2003443

John
Moderator

@David said:
Hello! new to S3. We had always stored our combined presets from Super 2.0x in our OS X documents folder. How do we get S3 to recognize them please?

Thank you!

Hi,

Combined Presets are stored in:
‘Users/{Username}/Library/Application Support/Toontrack/Superior2/PresetsEZX/{Libraryname}/Combined/’.
Superior 2 Combined Presets in here will be recognised by both Superior 2 and Superior 3 when the corresponding Library is loaded.

Superior 3 Presets are located in:
‘Users/{Username}/Library/Application Support/Toontrack/Superior3/PresetsEZX/{Libraryname}/S3Presets/’.

Both locations can be accessed by the ‘Manage in Finder’ menu entry in the plugins. Well, you can’t open the Superior 3 Preset location in Superior 2, of course.

If you have Superior 2 Projects (.s20) that you wish to open in Superior 3, I suggest you save them as Combined Presets in Superior 2, so that Superior 3 can “see” them.

BR,
John

John Rammelt - Toontrack
Technical Advisor

Replied April 5, 2018 at 21:05 #2003681

David
Participant

@John said:

Hi,

If you have Superior 2 Projects (.s20) that you wish to open in Superior 3, I suggest you save them as Combined Presets in Superior 2, so that Superior 3 can “see” them.

BR,
John

Hello John. We certainly appreciate the help. We tried several times last week, all to no avail. Resaving our S2.0 presets does not get us to see them inside of S3. What is amiss?

Replied April 15, 2018 at 20:56 #2003813

Nacio Chavez
Participant

@David said:

Hello John. We certainly appreciate the help. We tried several times last week, all to no avail. Resaving our S2.0 presets does not get us to see them inside of S3. What is amiss?

1. Save as Preset from SD2 (please note the Library saved as, i.e. The Metal Foundry, N.Y. – Avatar, etc…) and name the preset appropriately.
2. Open SD3 and load the library noted
3. Under the Default menu dropdown find “SD2 User Presets”. you will find your saved preset from SD2 and select.
4. enjoy…

1
Thanked by: evro123

Replied May 6, 2018 at 16:12 #2004275

Bob Peach
Participant

Hi
Was this ever resolved, i have saved SD2 project as combi presets, but when i open SD3 Default menu dropdown there is no “SD2 User Preset” I would love to enjoy….now back working with SD2 help

Replied May 6, 2018 at 18:20 #2004277

David
Participant

@Bob Peach said:
Hi
Was this ever resolved, i have saved SD2 project as combi presets, but when i open SD3 Default menu dropdown there is no “SD2 User Preset” I would love to enjoy….now back working with SD2 help

Wasn’t resolved for us. For exactly the same reasons you state. There is no found “SD2 User Preset” in S3! 🙂

Replied May 7, 2018 at 07:56 #2004284

John
Moderator

As noted above, you need to have the correct library loaded. E.g. Indiependent SDX User Presets will not be visible if you have the SD3 core library loaded.

BR,
John

John Rammelt - Toontrack
Technical Advisor

Replied September 15, 2018 at 17:28 #2058546

David
Participant

Hey there John. Thank you for your reply. (been ill for quite some time so apologies for not replying earlier – moral: don’t get old. LOL) Anyways. This still does not work for us. I ‘think‘ perhaps the reason might be due to where all of our old SD2 combined presets were stored. We stored them in the regal mac documents folder, inside a folder we named DFH custom presets etc. We did try to redo a bunch of them by opening SD2 and reserving the combined presets, but I still suspect it is not saving them ‘where’ SD3 wants to see them, as when we open up C&V in SD3, and pull down to custom presets, none of our presets saved in SD2 with C&V are there. Quite confusing???

Replied September 17, 2018 at 17:53 #2060895

John
Moderator

Hi David,

I just tried following my recipe myself and it worked as expected. I attach a series of screen shots to make sure you follow the instructions correctly.

1. First I select the C&V library, then check the ‘SD2 User Presets’ list.

2. Then I load my .s20 Project in Superior 2.

3. Save this as a Combined Preset in the Combined Presets menu.

John Rammelt - Toontrack
Technical Advisor

Replied September 17, 2018 at 17:59 #2060902

John
Moderator

4. I reload (switch to another library, then back) C&V and now my new Test preset is in the SD2 User Presets list.

5. Clicking the ‘Manage in Finder’ Menu entry under SD2 User Presets opens the folder where the Combined Preset should be.

This is not a place where you can put an .s20 Project file but a Combined Preset from another system can be copied here.

I hope this helps,

John

John Rammelt - Toontrack
Technical Advisor

1
Thanked by: David

Replied September 18, 2018 at 18:14 #2062184

David
Participant

This is awesome John. Got it! Thank you for helping the old man 🙂

Is there any way to use our S1 saved combined presets in S3? Meaning ones we created inside S2 using the S1-Drummer Library.

Replied September 18, 2018 at 21:39 #2062415

Scott
Moderator

David wrote:

This is awesome John. Got it! Thank you for helping the old man ?

Is there any way to use our S1 saved combined presets in S3? Meaning ones we created inside S2 using the S1-Drummer Library.

S1 sound libraries aren’t supported in S3 so any S1 presets won’t load.

Scott Sibley - Toontrack
Technical Advisor
Author

Replies

Viewing 15 replies - 1 through 15 (of 15 total)

You must be logged in to reply to this topic.

Please log in to read and reply to this topic.