Topic: Metal Foundry “Bleed” preset

Viewing 3 replies - 1 through 3 (of 3 total)

Replied August 5, 2012 at 17:15 #1959826

Nathan
Participant

Have you tried turning it down?

Am I understanding you correctly here?

>

SD2.3, NYII, C&V, MC, MF, ED, Latin Perc, Twisted, Pop, N1H, Electronic, Classic, Funkmasters, Rock Solid, Blues, Indie-Folk.

Replied August 5, 2012 at 20:26 #1959830

VOLiTiAN
Participant

I’ve gotta agree this is a common problem I find with some of the presets, it’s like the initial transient is just skipping past any limiters, It’s like you can’t find a compressor/limiter with a quick enough response/look ahead time, and these are produced presets, so surely there was some allowance made for the tone being created but still not smacking the nuts off the signal chain…

You can turn things down, and I would suggest a decent meter in the channel strip to check what you’re doing, effectively I put this down to an issue I sort when fully mixing, and I’m using look aheads on the limiters (not ideal for a live project) and linear phase mode on the EQ’s just to make sure there’s not a smearing of freq’s that’s causing a peak…

Unity gain anyone? 🙂

www.myspace.com/VOLiTiAN www.soundclick.com/VOLiTiAN www.reverbnation.com/VOLiTiAN www.soundcloud.com/VOLiTiAN

Replied August 12, 2012 at 03:26 #1959897

Jay Coover
Participant

Usually I think it only matters if you’re clipping your master buss. One solution, yeah, as planetnine says, turn the output down from Superior.

Are you seeing actual clipped peaks in a wav file, or just going into the red on the Superior output in your host?

Maybe put a limiter or compressor on the SD out to help. I usually do anyway unless the preset is compressed heavily already.

SD 2.3 NY vol 2/Metal Foundry/C & V/Roots 1 & 2/Music City Latin Percussion/Funkmasters/The Classic/Jazz/Pop!/#1 Hits/Electronic/Twisted/Claustrophobic EZKeys 1.1 with all the trimmings
Author

Replies

Viewing 3 replies - 1 through 3 (of 3 total)

You must be logged in to reply to this topic.

Please log in to read and reply to this topic.

Metal Foundry “Bleed” preset

Studio Corner

Viewing 3 replies - 1 through 3 (of 3 total)